Built-in Yamaha SPX effects
16 versatile inputs
Yamaha's EMX5016CF has a total of 16 input channels - eight for mono microphone or line input, plus four stereo pairs. The stereo channel pairs can function either as monaural mic inputs or stereo line ins. This system gives you extra microphone inputs if your sources are mostly microphones, or if you need to handle more stereo sources, the EMX5016CF will comfortably handle four pairs in addition to eight mono mic or line inputs.
3-band EQ, single-knob compression
Yamaha put 3-band EQ on all the EMX5016CF's input channels, but extra versatility is provided on the eight mono channels with mid-frequency sweep controls. The mid EQ center frequency can be continuously swept from 250 Hz through 5 kHz so you can precisely pinpoint frequencies in the critical midrange. The EMX5016CF also features compressors on all monaural microphone/line channels that can help to make vocals ride the mix better, give you that smooth compressed guitar sound, deliver more punchy bass. Just set the COMP control to the amount of compression you need.
Digital graphic EQ with presets, plus frequency response correction
An advanced digital 9-band stereo graphic equalizer goes beyond conventional analog types with a refined control interface, instant-recall presets, and user memory locations. It also works with the console's innovative Frequency Response Correction system for great response-shaping control. You can manually adjust each band, or use one of the presets as a starting point and edit from there. You also get three user memories to store your own EQ curves for instant recall whenever needed. The EMX5016CF's Frequency Response Correction System automatically adapts its output EQ to a given room, using either pink noise or a recorded music source you supply. The EQ setting can then be stored in one of the user memories for later recall if needed.
Onboard feedback suppressor and maximizer
The Feedback Suppressor works by detecting feedback frequencies on the stereo bus and applying precise notch filters to eliminate the feedback. The Feedback Suppressor has an automatic mode that automatically keeps track of and attenuates feedback frequencies for you, and a sensitive manual mode that lets you pinpoint and attenuate feedback points one by one. The EMX5016CF Maximizer is an advanced 3-band compressor that can be applied to the stereo bus for a more punchy "up-front" overall sound. Simply press the MAXIMIZE switch to instantly give the mix more presence and impact without sacrificing musical subtlety.
Built-in Yamaha SPX effects
The EMX5016CF includes two top-performance Yamaha SPX digital effect processors built in! You might only need ambience effects such as reverb and delay for live sound applications, but if you need other effects as well they're right at your fingertips, and you can use two different effects simultaneously. Each processor offers a selection of 16 top-quality effects including reverb, echo, chorus, flanger, phaser, and even distortion, with editable parameters that allow you to customize each effect.
Yamaha EMX5016CF Powered Mixer Features:
- Up to 12 Mics, 16 inputs total
- 84 stereo inputs
- Dual aux sends
- 2 x 500W
- Maximum Power switch
- Standby mode
- Power Amp Mode switch
- Yamaha speaker processing
- Lightweight design
- Dual SPX processors
- Input gain trim and pads
- 3-band mid-sweep channel EQ
- FRC System
- PFL and AFL monitoring
- One-knob compression
- 9-band digital graphic EQ
- Multi-band maximizer
- Lightweight design (11kg)
- Lamp connector
- Feedback suppressor
- 2 x 500W @ 4 ohms
- 8 x XLR (CH 1-8), 4 x XLR (CH 9-16 Stereo)
- 12 x Channels
- 8 x 1/4" (CH 1-8), 8 x 1/4" (CH 9-16, Stereo, RCA)
- 2 x 1/4" 2 x speakON, 2 x 1/4"
- 2 x RCA (Rec), 2 x 1/4" (Stereo Sub)
- 2 x 1/4" (EFX Send), 2 x 1/4" (Aux Send)
- 2 x Pre/Post, 2 x EFX
- Yes (CH 1-8)
- 1 x 1/4"
- 3-band Sweepable (Channels), 3-band (Stereo), 9-band Graphic (Main)
- Yes (Global Plus Compression on Channels 1-8)
- 17 x 60mm
- 24.3 lbs.