Musicians often asked us for a system for acoustic instruments that provides AER sound and quality everywhere ... independent from the mains. This is exactly what the Compact Mobile has been developed for.
Based on the Compact 60, thus identical in sound, but with adapted technology and slightly changed dimensions, you can play up to 4 hours without the mains. Whether you choose to play in the old town or on a glacier, the sound is always clear and omnipresent.In case of insufficient battery power the intelligent power control gives a warning and saves you from lack of power during performance. Moreover it prevents the batteries from being completely exhausted.
- 60 watts, battery powered
- 8” (200 mm) twin cone speaker
- twin channel, 3-/2-band eq
- digital effects
- up to 4 hours performance independent from the mains
You can use the High/Low switch and the Gain control to adjust the various pick-up systems and signal sources to Compact Mobile. The clip indicator shows that the input signal is too high.
The three and two band tone controls of your Compact Mobile amp are designed to fulfill the special requirements of acoustic instruments and the general demands of other sources. The Color switch in Channel 1 activates a mid-cut treble-boost filter that is particularly appropriate for fingerstyle techniques.
The AER Compact Mobile has an integrated (internal) digital effect permitting you to choose between four effects by using the select push button. The select button allows you to choose between the four build-in-effects. They are indicated by the LEDs between the return and master controls. Pos. 1 is a warm hall reverb, pos. 2 is a bright hall reverb, pos. 3 is a chorus with reverb and pos. 4 is a flanger.
The Return knob determines the intensity of the effect (as far to the left as possible means no effect). Furthermore, a supplementary effect device can be connected (external effect). For this purpose, use the sockets at the rear of Compact Mobile Send and Return (send to the input, return from the output of the external effect). The intensity will then be set by the external effect device. Using the Effect-Pan control, you can mix continuously variable effect portions into the channels.